I have a pretty well equipped shop but I’ve never had a compressor. I’m about to add one mostly for an air gun and to provide small amounts of compressed air to run small, model machines. (I have no need for any kind of nail/brad/pin guns.) I plan to put it in my shop basement and run a 15’ hose up through the ceiling to a 50’ reel mounted on the wall. I’ve got a couple questions:
1) I’ve decided on a Makita MAC210Q oil-less quiet compressor. Is this a mistake?
2) Do I need a dryer? I’m not worried about oil since this is an oil-less compressor
3) When dealing with electricity, you have to deal with voltage drop over distance and use the correct wire gauge. I’ve seen no discussion about this with air delivery. Is the friction loss to the hose not an issue so I’ll be fine with 65’ of hose?