what happens to CFM when dust extractor is hooked up to 2 1/2" port or 2 1/2" hose? Trying to determine if a dust extractor is a good replacement for my dead shopvac. I want to use it for a bandsaw and strip sander inside an enclosure. my old shop vac did the job well. I also want to use it for smaller tools in the future. I would like to stay at 2 1/2" if possible
my understanding is most
extractors ~150 cfm, 95-100 inch lift ~1 1/2" hose
shop vac ~150 cfm, 55 in lift ~ 2 1/2" hose.
if I put an adapter on the extractor, what happens to the CFM?